石家莊陽光棚廠家之安裝要求

1、深化設計：陽光棚制作前乙方須根據園林景觀圖紙的所示陽光棚造型與顏 色進行二次設計，設計方案需經過設計及甲方的認可后方可加工制作。
　　1，deepening Design: Before sun roof B shall be made ??in accordance with sun roof as shown in the second design the shape and color landscape drawings, designs subject to approval behind the design and production of processed Party.
　　2、連接方式：陽光棚主梁立柱與已完工結構擋土墻采用200*160*12鋼板預埋 鐵，M16*190化學錨栓鏈接，龍骨鋪設**橫平豎直，保證與陽光板接觸面積平滑，使陽光板扣壓嚴實牢固。
　　2, Connection: sun roof girder structure column and retaining walls have been completed using 200 * 160 * 12 steel embedded iron, M16 * 190 chemical anchor links, keel laying must be smooth vertical and horizontal, to ensure the smooth area in contact with the solar panels make solar panels withhold tight firm.
　　3、焊接打磨：接縫滿焊，打磨拋光；焊縫≥5㎜，焊縫均勻平滑，無明顯暇疵。 無虛焊、漏焊、堆焊，焊口打磨平整，光滑無毛刺。
　　3, welding sanding: full seam welding, grinding and polishing; ≥5㎜ welds, weld uniform and smooth, no obvious flaws. No Weld, weld, welding, weld polished smooth, smooth burr.
　　4、表面處理：金屬表面成形前須打沙除銹做防銹漆一道，成形焊接后焊點清理后涂防銹漆一道，面漆一道（顏色由業主定）
　　4, surface treatment: the metal surface to be playing before forming a sand blasting do rust, welding joints after cleaning up after forming a painted rust, paint a (color given by the owner)
　　5、固定陽光板的鋁合金扣條**穿防水膠條。
　　5, the fixed solar panels of aluminum buckle must wear waterproof tape.
　　6、壓條用玻璃膠固定在扣條上，兩側打玻璃膠密封。
　　6, layering plastic buckle fixed glass strips on both sides of the plastic glass seal.
　　7、打玻璃膠要求膠縫飽滿均勻，平整光滑，不能透氣滲水。
　　7, plastic glass glue joints require full uniform, smooth, not breathable water seepage.